NEX-VG10 - SEL50F12GM |Compatibility Information
SEL50F12GM
FE 50mm F1.2 GM
- The SteadyShot is not supported.
- Sliding the Focus Mode switch to MF position will change the focus mode setting, but on-screen (LCD monitor /Viewfinder) focus mode display will not change.
- Focus hold button of the lens does not work.
- When Iris ring is switched between auto iris mode and manual iris mode, on-screen display (LCD monitor /Viewfinder) may flicker for a brief second and focus position may be reset.
- When the Iris ring is set to manual iris mode, the Lens Model and Max Aperture Value of the Exif are not recorded correctly.
- When the Iris ring is set to manual iris mode, the aperture value is set at the value which Iris ring indicates regardless of exposure mode.
- If you rotate the Iris ring, the time before Power Save is not extended.
- When the Focus Mode switch is set to MF while AF is selected at body side, focus mode is manual but focus distance is not displayed. (AF will not work as well.)
- Exif lens names will not be recorded correctly.
- When F1.2 or F1.3 is selected in auto iris mode, F1.3 is displayed on the camera in either case, and the Exif value recorded is F1.3.
- When F1.2 is selected in manual iris mode, the value displayed on the camera and the Exif value recorded is F1.3, but the actual aperture value used for shooting is F1.2.
- When F1.7 is selected in auto iris mode, the Exif value recorded is F1.7, but the actual aperture value used for shooting is F1.8.
- When F1.8 is selected in manual iris mode, the value displayed on the camera and the Exif value recorded is F1.7, but the actual aperture value used for shooting is F1.8.
- When the exposure step of the camera is set to 0.3 stop basis, it is not possible to register an aperture value of F1.2 as a custom hold setting. You can register an aperture value of F1.2 when the exposure step is set to 0.5 stop basis.
- When the exposure step is set to 0.3 stop basis, it is not possible to set an aperture value of F1.2 or F1.3 from Imaging Edge Mobile or Imaging Edge Desktop (Remote).