SONY

NEX-3 - SEL200600G |Compatibility Information

SEL200600G

FE 200-600mm F5.6-6.3 G OSS
sample: SEL200600G

When using a lens directly mounted on the camera:

  • Sliding the Focus Mode switch to MF position will change the focus mode setting, but on-screen (LCD monitor /Viewfinder) focus mode display will not change.
  • Optical SteadyShot setting on lens will switch on/off the function, but the setting is not reflected to on-screen display (LCD monitor / viewfinder) nor recorded in EXIF data.
  • Focus hold button of the lens does not work.
  • When the Focus Mode switch is set to MF while AF is selected at body side, focus mode is manual but MF Assist will not work. (AF will not work as well.)
  • Even if the focus-range setting switch is set to near zone, the shooting focus range will be the same as Full
  • The camera may be out of focus when set to Continuous AF.

When using a teleconverter lens:

SEL14TC

  • The camera may be out of focus when set to Continuous AF.
  • The focal length and maximum aperture for the Exif lens name will be listed using magnification values. However, when the aperture values multiplied by magnification are 10 or higher, they will not display correctly.

SEL20TC

  • The camera may be out of focus when set to Continuous AF.
  • The focal length and maximum aperture for the Exif lens name will be listed using magnification values. However, when the aperture values multiplied by magnification are 10 or higher, they will not display correctly.