NEX-6 - SEL100400GM ｜Compatibility Information
SEL100400GM
FE 100-400mm F4.5-5.6 GM OSS
When using a lens directly mounted on the camera：
- The camera system software Ver.1.02 or later, the Exif [focal length] is recorded.
- Optical SteadyShot setting on lens will switch on/off the function, but the setting is not reflected to on-screen display (LCD monitor / viewfinder) nor recorded in EXIF data.
- Focus hold button of the lens does not work.
- Fast Hybrid AF is available in the center area with the system software Ver.1.03 or later.
- Exif lens names will not be recorded correctly.
When using a teleconverter lens：
SEL14TC
- The camera may be out of focus when set to Continuous AF.
- The focal length and maximum aperture for the Exif lens name will be listed using magnification values. However, when the aperture values multiplied by magnification are 10 or higher, they will not display correctly.
- Focal plane phase detection AF cannot be used for focal lengths with a maximum aperture value of F7.1 or above, so contrast AF will operate.
SEL20TC
- The camera may be out of focus when set to Continuous AF.
- The focal length and maximum aperture for the Exif lens name will be listed using magnification values. However, when the aperture values multiplied by magnification are 10 or higher, they will not display correctly.
- Focal plane phase detection AF cannot be used, so Contrast AF will operate.