SEL70200G2 - ILCE-7M2 ｜Compatibility Information

ILCE-7M2

When using a lens directly mounted on the camera：

The [Lens Comp.: Distortion] setting will be set to "Auto".
When the autofocus mode is set to something other than AF-C and the amount of focus movement is large until the focus is achieved, sometimes the exposure is incorrect after focus is achieved. You can use this with system software Version 1.20 or higher installed in the camera.

When using a teleconverter lens：

The [Lens Comp.: Distortion] setting will be set to "Auto".
When the autofocus mode is set to something other than AF-C and the amount of focus movement is large until the focus is achieved, sometimes the exposure is incorrect after focus is achieved. You can use this with system software Version 1.20 or higher installed in the camera.
The focal length and maximum aperture for the Exif lens name will be listed using magnification values. However, when the aperture values multiplied by magnification are 10 or higher, they will not display correctly. If you update the camera system software to Version 3.10 or higher, the name of the lens itself will be listed along with the name of the Teleconverter.

The [Lens Comp.: Distortion] setting will be set to "Auto".
When the autofocus mode is set to something other than AF-C and the amount of focus movement is large until the focus is achieved, sometimes the exposure is incorrect after focus is achieved. You can use this with system software Version 1.20 or higher installed in the camera.
The focal length and maximum aperture for the Exif lens name will be listed using magnification values. However, when the aperture values multiplied by magnification are 10 or higher, they will not display correctly. If you update the camera system software to Version 3.10 or higher, the name of the lens itself will be listed along with the name of the Teleconverter.