SELC1635G - NEX-3 ｜Compatibility Information
- The SteadyShot is not supported.
- Focus hold button of the lens does not work.
- Sliding the Focusing Ring to FULL MF position will change the focus mode setting, but on-screen (LCD monitor /Viewfinder) focus mode display will not change.
- When Focusing Ring is set to FULL MF position while the AF is selected at body side, focus mode is manual but MF Assist will not work. (AF will not work as well.)
- When Iris ring is switched between auto iris mode and manual iris mode, on-screen display (LCD monitor /Viewfinder) may flicker for a brief second and focus position may be reset.
- When the Iris ring is set to manual iris mode, the Lens Model and Max Aperture Value of the Exif are not recorded correctly.
- When the Iris ring is set to manual iris mode, the aperture value is set at the value which Iris ring indicates regardless of exposure mode.
- When Iris ring is switched between auto iris mode and manual iris mode during movie recording, the recording will be stopped.
- If you rotate the Iris ring, the time before Power Save is not extended.
- When the Iris ring is set to manual mode, Background Defocus Control in Photo Creativity does not work correctly however the on-screen display is shown as is conventionally done.
- Exif lens names will not be recorded correctly.