DSC-RX10M4 : Connect your smartphone to your camera

For Android smartphones

  • Connecting by Wi-Fi Using NFC
    1. : Select MENU → (Network) → [Ctrl w/ Smartphone] → [Ctrl w/ Smartphone] → [On].
    2. : Activate the NFC function on the smartphone.
    3. : Switch the camera to the shooting mode and display the [N] mark on the monitor. Then, touch the smartphone to the camera.
  • Connecting by QR Code
    1. : Select MENU → (Network) → [Ctrl w/ Smartphone] → [Ctrl w/ Smartphone] → [On].
    2. : Select MENU → (Network) → [Ctrl w/ Smartphone] → [Connection].
    3. : Launch PlayMemories Mobile on your smartphone.
    4. : Select [Scan QR Code of the Camera], and then read the QR code displayed on the monitor of the camera with the smartphone (for the first time only).
  • Connecting by Wi-Fi Using an SSID and Password
    1. : Select MENU → (Network) → [Ctrl w/ Smartphone] → [Ctrl w/ Smartphone] → [On].
    2. : Select MENU → (Network) → [Ctrl w/ Smartphone] → [Connection].
    3. : Press the (Delete) button on the camera.
    4. : Launch PlayMemories Mobile on your smartphone. Then, select the SSID (DIRECT-xxxx: xxxx) for the camera.
    5. : Input the password displayed on the camera into the smartphone (for the first time only).

For iPhone/iPad

  • Connecting by Wi-Fi Using NFC

    This connection method is only available for the iPhone 7 and later models with iOS version 11.0 or higher.

    1. : Select MENU → (Network) → [Ctrl w/ Smartphone] → [Ctrl w/ Smartphone] → [On].
    2. : Launch PlayMemories Mobile on your smartphone. Then, select [Scan NFC/QR Code of the Camera] → [Scan NFC of the Camera].
    3. : Switch the camera to the shooting mode and display the [N] mark on the monitor. Then, touch the smartphone to the camera.
    4. When using PlayMemories Mobile ver. 6.3 on iOS version 11.0 or higher, the following operations are not required.

      : Install the profile following the instructions shown on the smartphone (for the first time only).
    5. : Select [Settings] on the "Home" screen → [Wi-Fi] → the SSID (DIRECT-xxxx: xxxx) for the camera.
  • Connecting by QR Code
    1. : Select MENU → (Network) → [Ctrl w/ Smartphone] → [Ctrl w/ Smartphone] → [On].
    2. : Select MENU → (Network) → [Ctrl w/ Smartphone] → [Connection].
    3. : Launch PlayMemories Mobile on your smartphone and select [Scan QR Code of the Camera]. Then, read the QR code displayed on the monitor of the camera with the smartphone (for the first time only).
    4. When using PlayMemories Mobile ver. 6.3 on iOS version 11.0 or higher, the following operations are not required.

      : Install the profile following the instructions shown on the smartphone (for the first time only).
    5. : Select [Settings] on the "Home" screen → [Wi-Fi] → the SSID (DIRECT-xxxx: xxxx) for the camera.
    6. : Return to the "Home" screen and launch PlayMemories Mobile.
  • Connecting by Wi-Fi Using an SSID and Password
    1. : Select MENU → (Network) → [Ctrl w/ Smartphone] → [Ctrl w/ Smartphone] → [On].
    2. : Select MENU → (Network) → [Ctrl w/ Smartphone] →[Connection].
    3. : Press the (Delete) button on the camera.
    4. : Select [Settings] on the "Home" screen → [Wi-Fi] → the SSID (DIRECT-xxxx: xxxx) for the camera.
    5. : Input the password displayed on the camera into the smartphone (for the first time only).
    6. : Return to the "Home" screen and launch PlayMemories Mobile.

Return to Top