HDR-AZ1 : Connect your smartphone to your camera

For Android smartphones

  • Connecting by Wi-Fi Using NFC
    1. : Set the Wi-Fi connection mode to single connection.
    2. : Activate the NFC function on the smartphone.
    3. : Touch the smartphone to the [N] mark on the camera.
  • Connecting by QR Code
    1. : Set the Wi-Fi connection mode to single connection.
    2. : Launch PlayMemories Mobile on the smartphone.
    3. : Select [Scan QR Code of the Camera]. Then, read the QR code attached to the back of the camera's battery cover with the smartphone (first time only).
  • Connecting by Wi-Fi Using an SSID and Password
    1. : Set the Wi-Fi connection mode to single connection.
    2. : Launch PlayMemories Mobile on the smartphone.
    3. : Select the SSID (DIRECT-xxxx: xxxx) for the camera. This is attached to the back of the camera's battery cover.
    4. : Input the password attached to the back of the battery cover on the camera into the smartphone (first time only).

For iPhone/iPad

  • Connecting by Wi-Fi Using NFC

    This connection method is only available for the iPhone 7 or later models, that have iOS version 11.0 or higher.

    1. : Set the Wi-Fi connection mode to single connection.
    2. : Launch PlayMemories Mobile on the smartphone. Then, select [Scan NFC/QR Code of the Camera] → [Scan NFC of the Camera].
    3. : Touch the smartphone to the [N] mark on the camera.
    4. When using PlayMemories Mobile ver. 6.3 on iOS version 11.0 or higher, the following operations are not required.

      : Install the profile following the instructions shown on the smartphone (first time only).
    5. : Select [Settings] on the "Home" screen → [Wi-Fi] → the SSID for the camera (attached to the back of the battery cover).
  • Connecting by QR Code
    1. : Set the Wi-Fi connection mode to single connection.
    2. : Launch PlayMemories Mobile on the smartphone.
    3. : Select [Scan QR Code of the Camera]. Then, read the QR code attached to the back of the camera's battery cover with the smartphone (first time only).
    4. When using PlayMemories Mobile ver. 6.3 on iOS version 11.0 or higher, the following operations are not required.

      : Install the profile following the instructions shown on the smartphone (first time only).
    5. : Select [Settings] on the "Home" screen → [Wi-Fi] → the SSID for the camera (attached to the back of the battery cover).
    6. : Return to the "Home" screen and launch PlayMemories Mobile.
  • Connecting by Wi-Fi Using an SSID and Password
    1. : Set the Wi-Fi connection mode to single connection.
    2. : Select [Settings] on the "Home" screen → [Wi-Fi] → the SSID for the camera (attached to the back of the battery cover).
    3. : Input the password attached to the back of the battery cover on the camera into the smartphone (first time only).
    4. : Return to the "Home" screen and launch PlayMemories Mobile.

Return to Top