SONY
PMB Portable Installer for Windows
You can download the latest version of the internal software “PMB Portable” from here.
Please use it to update “PMB Portable” or when it is deleted from the camera.

*You cannot use PMB Portable if it is not supported with your camera.
OS

  • Windows(R) XP Service Pack3(SP3)*
  • Windows Vista(R) Service Pack2(SP2)
  • Windows(R) 7 Service Pack1(SP1)
  • Windows(R) 8

  • * 64-bit editions and Starter (Edition) are not supported.
    • Standard installation is required.
    • Operation is not assured if the above OS has been upgraded or in a multi-boot environment.

How to download and install

  • For NSC-GC1,NSC-GC3,DSC-T2,DSC-T700,DSC-G3,MHS-CM1,MHS-PM1, click<this page>and use Ver3.0/4.0.
  • For customers that use MHS-CM5, MHS-PM5, MHS-PM5K, if you want to use it with both Mac and Windows, please refer to <this page>and use the older version.
  • For DSC-H55, DSC-HX5, DSC-HX5C, DSC-HX5V, DSC-S1900, DSC-S2000, DSC-S2100, DSC-S2200, DSC-TX5, DSC-TX7, DSC-W310, DSC-W320, DSC-W330, DSC-W350, DSC-W350D, DSC-W360, DSC-W370, DSC-W380, DSC-W390, if this is installed, PMB Portable for Mac will be deleted. If you want to use it with both Mac and Windows, please refer to <this page>and use the older version.
 
Before you start, log on as a user with administrative privileges.
  1. Click the [Download] button to download the program.

    [PMBP_WIN57_Upgrade1208a.exe]
    (6.57MB(6,892,672bytes))

  2. Turn on the camera, confirm that the USB setting of the camera is set to "Mass Storage Mode" then connect to the computer with an USB cable.

  3. Confirm that "PMBPORTABLE" appears in [Computer] ([My Computer] for Windows XP) of your computer.

  4. Double click the downloaded file to start installation.
    Follow the instructions in the screen.

    * If the available space in the camera is insufficient, the confirmation message will appear.
    If you want to continue the installation, click [Yes].

PAGE TOP
Copyright 2014 Sony Corporation