Sony Overseas Models
LA-EA1 firmware upgrade
Confirming if the unit is applicable (Checking the firmware version)
Follow the instruction below to check the firmware version.
If the firmware version is Ver.02 or later, the upgrade is not required.
Check the firmware version
  1. Attach the mount adaptor and the A-mount lens to the camera, then turn on the camera.
  2. Select [Menu] - [Setup] - [Version] on the camera.
  3. The firmware version is displayed (Figure 1).

    Check the firmware version
    (Figure 1)
Preparing for the firmware upgrade
Please prepare the following items in addition to your camera.

System requirements for a computer

[ Windows ]
  • Supported OS
    • Windows(R) 7
    • Windows Vista(R) SP2(*1)
    • Windows(R) XP SP3(*2)

      *1 Starter edition is not supported.
      *2 64-bit and Starter editions are not supported.
  • Other system requirements
    • Hard disk space: 200MB or more
    • RAM: 512MB or more

      * Please close all other application software before upgrading the firmware.
PC

[ Mac OS ]
  • Supported OS
    • Mac OS X v.10.5 – 10.6
      * The 64-bit kernel is not supported.
  • Other system requirements
    • CPU: Intel processor
    • Hard disk space: 200MB or more
    • RAM: 256MB or more

      * Please close all other application software before upgrading the firmware.


その他にご用意いただくもの

Power source for the camera

Fully charged rechargeable battery pack NP-FV70 or NP-FV100 (sold separately)
or
AC adaptor AC-PW10AM

Note The upgrade can be performed only when the remaining battery level is battery (three marks) or more.
We recommend that you use a fully charged battery or the AC adaptor AC-PW10AM.


USB cable supplied with the camera



Downloading and upgrading
Please read the following END-USER LICENSE AGREEMENT carefully and click the [Agree] button to proceed to the next page.

END-USER LICENSE AGREEMENT


Agree(Windows)Agree(Mac OS)

PAGE TOP
 
Copyright 1995-2014 Sony Marketing (Japan) Inc.