Functions of this App

1. : Open MENU →  (Network) → [Smartphone Connect] screen.
2. : Set [Smartphone Connection] to [On] and select [ Connection].
3. : Launch Imaging Edge Mobile on your smartphone and proceed as follows.

   When Imaging Edge Mobile has been newly installed

   [Models other than the above] → [Camera Connection/Registration]

   When adding a second (or subsequent) camera to a previously installed instance of Imaging Edge Mobile

   [Camera Connection/Registration] → [Register other models]

4. : Select [Scan QR Code], then scan the QR Code displayed on the camera with your smartphone.

Refer to <Operating the camera remotely> for operation instructions.

1. : Open MENU →  (Network) → [Smartphone Connect] screen.
2. : Set [Smartphone Connection] to [On] and select [ Connection].
3. : Press the (Delete) button on the camera.
4. : Launch Imaging Edge Mobile on your smartphone and proceed as follows.

   When Imaging Edge Mobile has been newly installed

   [Models other than the above] → [Camera Connection/Registration]

   When adding a second (or subsequent) camera to a previously installed instance of Imaging Edge Mobile

   [Camera Connection/Registration] → [Register other models]

5. : Select [Connect using the camera SSID/password] → [Enter SSID/Password], then enter the SSID (DIRECT-xxxx: xxxx) and password displayed on the camera.

Refer to <Operating the camera remotely> for operation instructions.

If the camera and the smartphone are already connected via Wi-Fi before you launch Imaging Edge Mobile, the camera name will be displayed in the [Camera List]. Tap [Start] to the right of the camera name.