Other shooting functions
10. Temporarily changing the shutter speed ([Reg. Custom Shoot Set])
This method is convenient when you want to change the shutter speed temporarily, such as to shoot an electrical scoreboard* as a note in sports photography. This method is also helpful for changing settings other than the shutter speed temporarily.
Assign the setting to a key that you can press and hold while shooting images.
* The characters on the scoreboard will be partially broken if you capture it at a high shutter speed.
| Advance preparation | MENU → (Setup) → [Operation Customize] → [ Custom Key/Dial Set.] → the desired key → Select from among [Recall Custom hold 1] through [Recall Custom hold 3] → Set the shooting mode to [Shutter Priority] or [Manual Exposure], and the shutter speed to about 1/60 seconds. → [Register]. |
|---|---|
| Shutter speed: A high speed such as 1/1600 second | |
| Shooting | Shoot sports scenes at a high shutter speed such as 1/1600 second. Press and hold the assigned key to switch the shutter speed to 1/60 second only when shooting the electrical scoreboard. |
11. How to turn the brightness level/overexposure indication on or off (Zebra)
The camera displays a zebra pattern over part of the image if the brightness level meets the IRE level that you have set. You can turn the zebra display on or off quickly.
| Advance preparation |
|
|---|---|
| Shooting |
You can turn the zebra display on or off by pressing the assigned key.
|
12. How to shoot telephoto images by changing the angle of view (APS-C/Super 35mm)
Although this camera is equipped with a 35 mm full-frame image sensor, you can intentionally shoot images in the APS-C size to make the angle of view narrower, allowing you to obtain the same effect as a telephoto lens without changing the lens. Although the pixel count and file size become smaller, you can shoot RAW images or select a focus area, unlike with the digital zoom.
You can set this function from
(Shooting) in MENU. However, it is recommended that you assign the function to a custom key such as the C4 button if you will be using it frequently.
| Advance preparation | MENU → (Setup) → [Operation Customize] → [ Custom Key/Dial Set.] → Select the desired key → [ /Full Frame]. |
|---|---|
| Shooting | You can switch between the 35-mm full-frame image size and the APS-C-equivalent size by pressing the assigned key. |
(Setup) → [Operation Customize] → [
Custom Key/Dial Set.] → the desired key → Select from among [Recall Custom hold 1] through [Recall Custom hold 3] → Set the shooting mode to [Shutter Priority] or [Manual Exposure], and the shutter speed to about 1/60 seconds. → [Register].
(Exposure/Color) → [Zebra Display] → [
Zebra Level].
/Full Frame].