When using a lens directly mounted on the camera：

• Optical SteadyShot setting on lens will switch on/off the function, but the setting is not reflected to on-screen display (LCD monitor / viewfinder) nor recorded in EXIF data.
• Focus hold button of the lens does not work.
• When Iris ring is switched between auto iris mode and manual iris mode, on-screen display (LCD monitor /Viewfinder) may flicker for a brief second and focus position may be reset.
• When the Iris ring is set to manual iris mode, the Lens Model and Max Aperture Value of the Exif are not recorded correctly.
• When the Iris ring is set to manual iris mode, the aperture value is set at the value which Iris ring indicates regardless of exposure mode.
• If you rotate the Iris ring, the time before Power Save is not extended.
• Even if the focus-range setting switch is set to near zone, the shooting focus range will be the same as Full
• When the autofocus mode is set to something other than AF-C and the amount of focus movement is large until the focus is achieved, sometimes the exposure is incorrect after focus is achieved. The correct exposure can be obtained by pressing the shutter button halfway again or using AEL again.
• Exif lens names will not be recorded correctly.

When using a teleconverter lens：

• SEL14TC
  
• SEL20TC