SONY

NEX-VG30 - SEL300F28GM |Compatibility Information

SEL300F28GM

SEL300F28GM

FE 300mm F2.8 GM OSS

sample: SEL300F28GM

When using a lens directly mounted on the camera:

  • Angle of tripod mount needs to be adjusted accordingly to attach lens on camcorder body.
  • Optical SteadyShot setting on lens will switch on/off the function, but the setting is not reflected to on-screen display (LCD monitor / viewfinder) nor recorded in EXIF data.
  • Focus hold button of the lens does not work.
  • When the autofocus mode is set to something other than AF-C and the amount of focus movement is large until the focus is achieved, sometimes the exposure is incorrect after focus is achieved. The correct exposure can be obtained by pressing the shutter button halfway again or using AEL again.
  • Exif lens names will not be recorded correctly.

When using a teleconverter lens:

SEL14TC

  • The focal length and maximum aperture for the Exif lens name will be listed using magnification values. However, when the aperture values multiplied by magnification are 10 or higher, they will not display correctly.

SEL20TC

  • The focal length and maximum aperture for the Exif lens name will be listed using magnification values. However, when the aperture values multiplied by magnification are 10 or higher, they will not display correctly.