SONY

NEX-F3 - SEL90M28G ｜Compatibility Information

SEL90M28G

FE 90mm F2.8 Macro G OSS
sample: SEL90M28G
  • Optical SteadyShot setting on lens will switch on/off the function, but the setting is not reflected to on-screen display (LCD monitor / viewfinder) nor recorded in EXIF data.
  • Focus hold button of the lens does not work.
  • Even if the focus-range setting switch is set to near zone, the shooting focus range will be the same as Full
  • When the autofocus mode is set to something other than AF-C and the amount of focus movement is large until the focus is achieved, sometimes the exposure is incorrect after focus is achieved. The correct exposure can be obtained by pressing the shutter button halfway again or using AEL again.