DSC-RX0M2 : Connect your smartphone to your camera

For Android smartphones

  • Connecting by QR Code
    1. : Select MENU → (Network) → [Ctrl w/ Smartphone]. Set [Ctrl w/ Smartphone] to [On], and set [Connection Type] to [Single].
    2. : Select MENU → (Network) → [Ctrl w/ Smartphone] → [Connection Info.].
    3. : Launch Imaging Edge Mobile on your smartphone.
    4. :

      When connecting with a new camera

      Select [Connect with a new camera] → [Scan QR Code], then scan the QR Code displayed on the camera with your smartphone.

      With a camera that has been connected previously

      Select the camera name, which will be displayed in the [Camera List].

  • Connecting by Wi-Fi Using an SSID and Password
    1. : Select MENU → (Network) → [Ctrl w/ Smartphone]. Set [Ctrl w/ Smartphone] to [On], and set [Connection Type] to [Single].
    2. : Select MENU → (Network) → [Ctrl w/ Smartphone] → [Connection Info.].
    3. : Press the up button on the camera.
    4. : Launch Imaging Edge Mobile on your smartphone.
    5. :

      When connecting with a new camera

      Select [Connect with a new camera] → [Connect using the camera SSID/password] → [Enter SSID/Password], then enter the SSID (DIRECT-xxxx: xxxx) and password displayed on the camera.

      With a camera that has been connected previously

      Select the camera name, which will be displayed in the [Camera List].

For iPhone/iPad

  • Connecting by QR Code
    1. : Select MENU → ◎(Network) → [Ctrl w/ Smartphone]. Set [Ctrl w/ Smartphone] to [On], and set [Connection Type] to [Single].
    2. : Select MENU → ◎(Network) → [Ctrl w/ Smartphone] → [Connection Info.].
    3. : Launch Imaging Edge Mobile on your smartphone.
    4. :

      When connecting with a new camera

      Select [Connect with a new camera] → [Scan QR Code of the Camera], then scan the QR code displayed on the camera with your smartphone.

      With a camera that has been connected previously

      Select the camera name, which will be displayed in the [Camera List].

  • Connecting by Wi-Fi Using an SSID and Password
    1. : Select MENU → (Network) → [Ctrl w/ Smartphone]. Set [Ctrl w/ Smartphone] to [On], and set [Connection Type] to [Single].
    2. : Select MENU → (Network) → [Ctrl w/ Smartphone] → [Connection Info.].
    3. : Press the up button on the camera.
    4. : Launch Imaging Edge Mobile on your smartphone.
    5. :

      When connecting with a new camera

      Select [Connect with a new camera] → [Connect using the camera SSID/password] → [Enter SSID/Password], then enter the SSID (DIRECT-xxxx: xxxx) and password displayed on the camera.

      With a camera that has been connected previously

      Select the camera name, which will be displayed in the [Camera List].

Return to Top