Functions of this App

1. : Select MENU → (Network) → [Ctrl w/ Smartphone] → [Ctrl w/ Smartphone] → [On].
2. : Select MENU → (Network) → [Ctrl w/ Smartphone] → [Connection].
3. : Launch Imaging Edge Mobile on your smartphone.
4. :

   When connecting with a new camera

   Select [Connect with a new camera] → [Scan QR Code], then scan the QR Code displayed on the camera with your smartphone.

   With a camera that has been connected previously

   The camera name appears in [Camera List]. Tap [Start] next to it.

Refer to <Operating the camera remotely> for operation instructions.

1. : Select MENU → (Network) → [Ctrl w/ Smartphone] → [Ctrl w/ Smartphone] → [On].
2. : Select MENU → (Network) → [Ctrl w/ Smartphone] → [Connection].
3. : Press the (Delete) button on the camera.
4. : Launch Imaging Edge Mobile on your smartphone.
5. :

   When connecting with a new camera

   Select [Connect with a new camera] → [Connect using the camera SSID/password] → [Enter SSID/Password], then enter the SSID (DIRECT-xxxx: xxxx) and password displayed on the camera.

   With a camera that has been connected previously

   The camera name appears in [Camera List]. Tap [Start] next to it.

Refer to <Operating the camera remotely> for operation instructions.

This connection method is only available for NFC-compatible Android devices and for the iPhone 7 and later models.

1. : Select MENU → (Network) → [Ctrl w/ Smartphone] → [Ctrl w/ Smartphone] → [On].
2. : Launch Imaging Edge Mobile on your smartphone.
3. :

   When connecting with a new camera

   Select [Connect with a new camera] → [Connect with the camera through One-touch (NFC)] → [Tap here].

   With a camera that has been connected previously

   The camera name appears in [Camera List]. Tap [Start] next to it.

4. : (Only when connecting with a new camera) Switch the camera to the shooting mode and display the [N] mark on the monitor. Then, touch the smartphone to the camera.

Refer to <Operating the camera remotely> for operation instructions.

If the camera and the smartphone are already connected via Wi-Fi before you launch Imaging Edge Mobile, perform the following procedure.

If the camera name is displayed in the [Camera List]

Tap [Start] next to the camera name.

If the camera name is not displayed in the [Camera List]

Select [Connect with a new camera] → [Wi Fi connected to camera].