DSC-RX10M4 : Remote shooting

  • Connecting by QR Code
    1. : Select MENU → (Network) → [Ctrl w/ Smartphone] → [Ctrl w/ Smartphone] → [On].
    2. : Select MENU → (Network) → [Ctrl w/ Smartphone] → [Connection].
    3. : Launch Imaging Edge Mobile on your smartphone.
    4. :

      When connecting with a new camera

      Select [Connect with a new camera] → [Scan QR Code], then scan the QR Code displayed on the camera with your smartphone.

      With a camera that has been connected previously

      Select the camera name, which will be displayed in the [Camera List].

  • Connecting by Wi-Fi Using an SSID and Password
    1. : Select MENU → (Network) → [Ctrl w/ Smartphone] → [Ctrl w/ Smartphone] → [On].
    2. : Select MENU → (Network) → [Ctrl w/ Smartphone] → [Connection].
    3. : Press the (Delete) button on the camera.
    4. : Launch Imaging Edge Mobile on your smartphone.
    5. :

      When connecting with a new camera

      Select [Connect with a new camera] → [Connect using the camera SSID/password] → [Enter SSID/Password], then enter the SSID (DIRECT-xxxx: xxxx) and password displayed on the camera.

      With a camera that has been connected previously

      Select the camera name, which will be displayed in the [Camera List].

  • Connecting by Wi-Fi Using NFC
    1. : Select MENU → (Network) → [Ctrl w/ Smartphone] → [Ctrl w/ Smartphone] → [On].
    2. : Launch Imaging Edge Mobile on your smartphone.
    3. :

      When connecting with a new camera

      Select [Connect with a new camera] → [Connect with the camera through One-touch (NFC)] → [Tap here].

      With a camera that has been connected previously

      Select the camera name, which will be displayed in the [Camera List].

    4. : (Only when connecting with a new camera) Switch the camera to the shooting mode and display the [N] mark on the monitor. Then, touch the smartphone to the camera.

    For iPhone/iPad
    This connection method is only available for the iPhone 7 and later models.

  • If the camera and the smartphone are already connected

    If the camera and the smartphone are already connected via Wi-Fi before you launch Imaging Edge Mobile, perform the following procedure.

    If the camera name is displayed in the [Camera List]

    Select the camera name or [Start].

    If the camera name is not displayed in the [Camera List]

    Select [Connect with a new camera] → [Wi Fi connected to camera].

Was this article helpful?
We are holding a simple survey to further improve our services. If you could answer the survey, it would be much appreciated.
Your responses will be used to further develop and improve our products/services. The survey responses will be processed statistically and will not be disclosed in a manner in which an individual can be distinguished.

Why has this not helped?






Return to Top