HDR-AS300 : Remote shooting

  • Connecting by QR Code
    1. On the camera : Select MENU →  →  → .
    2. On the camera : Select the shooting mode ( ⁄  ⁄  ⁄  ).
    3. On the smartphone : Launch Imaging Edge Mobile on the smartphone.
    4. On the smartphone :

      When connecting with a new camera

      Select [Connect with a new camera] → [Scan QR Code], then scan the QR code on the back of the camera's battery cover with your smartphone.

      With a camera that has been connected previously

      The camera name appears in [Camera List]. Tap [Start] next to it.

    Refer to <Operating the camera remotely> for operation instructions.

  • Connecting by Wi-Fi Using an SSID and Password
    1. On the camera : Select MENU →  →  → .
    2. On the camera : Select the shooting mode ( ⁄  ⁄  ⁄  ).
    3. On the smartphone : Launch Imaging Edge Mobile on the smartphone.
    4. On the smartphone :

      When connecting with a new camera

      Select [Connect with a new camera] → [Connect using the camera SSID/password] → [Enter SSID/Password], then enter the SSID (DIRECT-xxxx: xxxx) and password on the back of the camera's battery cover.

      With a camera that has been connected previously

      The camera name appears in [Camera List]. Tap [Start] next to it.

    Refer to <Operating the camera remotely> for operation instructions.

  • Connecting by Wi-Fi Using NFC

    This connection method is only available for NFC-compatible Android devices and for the iPhone 7 and later models.

    1. On the camera : Select MENU →  →  → .
    2. On the camera : Select the shooting mode ( ⁄  ⁄  ⁄  ).
    3. On the smartphone : Launch Imaging Edge Mobile on your smartphone.
    4. On the smartphone :

      When connecting with a new camera

      Select [Connect with a new camera] → [Connect with the camera through One-touch (NFC)] → [Tap here].

      With a camera that has been connected previously

      The camera name appears in [Camera List]. Tap [Start] next to it.

    5. On the camera : (Only when connecting with a new camera) Switch the camera to the shooting mode and display the [N] mark on the monitor. Then, touch the smartphone to the camera.

    Refer to <Operating the camera remotely> for operation instructions.

  • Bluetooth

    The camera can be powered on and off from a smartphone by connecting the camera and the smartphone via Bluetooth.

    1. On the camera : Select MENU →  →  → .
    2. On the camera : Select MENU →  →  → .
    3. Connect the camera and the smartphone using Wi-Fi (first time only).
    4. On the smartphone : Select [Camera Remote Power ON/OFF] from the Imaging Edge Mobile menu.
    5. On the smartphone : When a message prompting you to allow the pairing appears on the screen, allow it (first time only).
    6. On the camera : Press the REC/ENTER button on the camera to complete the pairing (first time only).
  • Multi Camera Control

    You can connect up to 5 cameras simultaneously to perform shooting.
    You must use a smartphone equipped with a tethering function.
    Multi Camera Control

  • If the camera and the smartphone are already connected

    If the camera and the smartphone are already connected via Wi-Fi before you launch Imaging Edge Mobile, perform the following procedure.

    If the camera name is displayed in the [Camera List]

    Tap [Start] next to the camera name.

    If the camera name is not displayed in the [Camera List]

    Select [Connect with a new camera] → [Wi Fi connected to camera].

Was this article helpful?
We are holding a simple survey to further improve our services. If you could answer the survey, it would be much appreciated.
Your responses will be used to further develop and improve our products/services. The survey responses will be processed statistically and will not be disclosed in a manner in which an individual can be distinguished.

Why has this not helped?






Return to Top