Save/Load Settings

You can save/load camera settings to/from a memory card. You can also load settings from another camera of the same model.

  1. MENU(Setup) → [Reset/Save Settings][Save/Load Settings] → desired item.

Menu item details

Load:
Loads settings from a memory card to this camera.
Save:
Saves the current settings of this camera to a memory card.
Delete:
Deletes the settings saved on a memory card.


Settings that cannot be saved

The following setting parameters cannot be saved using the [Save/Load Settings] function. (Menu items without setting parameters, such as, [Focus Magnifier], are not listed.)

(Shooting)
IPTC Information
Copyright Info

(Exposure/Color)
External Flash Set.
White Balance: Custom 1/Custom 2/Custom 3

(Focus)
Face Memory

(Network)
FTP Transfer Func.*
Cloud Connection
WPS Push
Access Point Set.
Wi-Fi Frequency Band
IP Address Setting
Edit Device Name
Import Root Certificate
Access Authen. Settings
Security(IPsec)

* You can save or load settings under [FTP Transfer Func.] by selecting MENU (Network) → [FTP Transfer][FTP Transfer Func.][Save/Load FTP Settings]. For details, refer to the “FTP Help Guide.”
https://rd1.sony.net/help/di/ftp_2410/h_zz/


(Setup)
Area/Date/Time Setting
Language

Note

  • You can save up to 10 settings per memory card. When 10 settings have been already saved, you cannot perform [Save New]. Delete the existing settings using [Delete], or overwrite them.
  • Only Slot 1 is used for saving or loading data. You cannot change the saving/loading destination slot.
  • You cannot load settings from a camera of a different model.
  • Even if the model name is the same, settings from a camera with a different system software version may fail to load.
  • You can use this function to save settings registered to [Camera Set. Memory]. However, [Save/Load Settings] is unavailable when the mode dial is set to 1/2/3 ( Recall Camera Setting). Set the mode dial to a position other than 1/2/3 before using this function.
TP1001366446