English 

Radio-Controlled Lighting System

Compatibility

This section provides compatibility information for cameras and flashes when performing wireless radio flash shooting or remote-release shooting.

Wireless radio flash shooting

Commander side
FA-WRC1M Wireless Radio Commander A list of compatible cameras can be found in <Accessorires Compatibility Information>. Flashes cannot be used on the commander side.
HVL-F60RM/F45RM Flash A list of compatible cameras can be found in <Accessorires Compatibility Information>. Works not only as a commander but also as a flash. The FA-WRC1M is not needed.
Receiver side
Wireless Radio Receiver FA-WRR1 Compatible flashes (refer to the notes below):
  • HVL-F60M/F43M *1
  • HVL-F32M *1 *2
  • HVL-F58AM/F43AM/F42AM *1 *3 *4
HVL-F60RM/F45RM Flash Works not only as a receiver but also as a flash. The FA-WRR1 is not needed.
  • *1 Multiple flash is not supported. Cannot use together with the wireless flash function equipped with flash.
  • *2 Set the power level to 1/16 or above when shooting with manual flash or high speed synchronization (HSS). (For groups including HVL-F32M.)
  • *3 A separately sold Shoe Adaptor ADP-MAA is necessary to attach to the Wireless Radio Receiver.
  • *4 TTL flash is not supported.

Combination with wired flash shooting

A wireless radio flash cannot be combined with a wired off-camera flash using the FA-CS1M Off-Camera Shoe and/or the FA-CC1AM Off-Camera Cable.

Remote-release shooting

Commander side (Pattern A)
Wireless Radio Commaner FA-WRC1M A list of compatible cameras can be found in <Accessorires Compatibility Information>. Flashes cannot be used on the commander side.
HVL-F45RM Flash Unavailable
HVL-F60RM Flash A list of compatible cameras can be found in <Accessorires Compatibility Information>. Works not only as a commander but also as a flash. The FA-WRC1M is not needed.
Commander side (Pattern B)
Wireless Radio Commaner FA-WRC1M Available
HVL-F45RM Flash Unavailable
HVL-F60RM Flash Available
Receiver side
Wireless Radio Receiver FA-WRR1 A list of compatible cameras can be found in <Accessorires Compatibility Information>.
  • Connect the receiver with the camera using the separately sold VMC-MM1 Multi-Terminal Connecting Cable.
  • Not compatible with the connecting cable for the Remote Terminal supplied with the RM-VPR1, VCT-VPR100, VCT-VPR10, etc.
HVL-F45RM Flash Works only as a flash and not as a receiver. The FA-WRR1 Wireless Radio Receiver and the VMC-MM1 Multi-Terminal Connecting Cable are required. Attach the flash directly to the camera.
HVL-F60RM Flash Works both as a flash and as a receiver. A VMC-MM1 Multi-Terminal Connecting Cable is required.
Back to TOP