SONY

Trim Videos

A simple edit function which can cut out your favorite parts of video content and save them as new video files in the MP4 format. You can also capture photos of your favorite scene in videos and save them as a still image.

Click [Tools] > [Trim Videos].

Drag and drop the video file shown in thumbnails into the right area then click [Next] to open the edit window.

Set the IN point (start) / OUT point (end).

The video data designated between the IN Point and OUT Point remains.Move the IN Point(IN Point) or OUT Point(OUT Point) slider, or start playback and click the [Set IN Point] or [Set OUT Point] button during playback.

When trimming is complete, click [Save Edited Video...].

When the [Save Video] window opens, optionally change the file name and select [Save]. The trimmed video file is saved on the same folder leaving the original video file as it is.

Page top

Combine Videos

This function can combine multiple video files to one file.

  • The combine function is only available for video materials in AVCHD, MPEG-2, and MP4 format. Same file formats are required for combining video materials.
  • To combine multiple video files to one video file, each video file is required to be the same in the below points.
  • File format/Codec/Video screen size/Bit rate/Frame rate
  • The combine function is NOT available for the NTSC and PAL combination.

Click [Tools] > [Combine Videos].

Drag and drop multiple videos shown in thumbnails into the right area, then click [Next] to open the edit window.

Change the order of selected multiple video files by dragging and dropping if necessary. Click [Combine] to start the combining process.

When the combining process is complete, the combined video file is saved on the same folder of the first video material. Each video file remains on the same place the original video file existed.

Page top

Convert to MP4 and Save

You can save video files after converting them to MP4 format. MP4 format is suitable for uploading to the Web.

Click [Tools] > [Convert to MP4 and Save].

Drag and drop the video file shown in thumbnails into the right area then click [Next] to open the edit window.

Set the image quality and destination folder for the converted video, and click [Start]. The convert process begins.

Page top

Rotate Left / Rotate Right

You can rotate videos in MP4 format or photos 90 degrees to the left or right.

  • Only videos in MP4 format or photos can be rotated.

Click [Tools] at the upper right.

Select the video file shown in thumbnails, then click [Rotate Left] or [Rotate Right] to rotate the video 90 degrees to the left or right.

Page top

Create Multi View

You can create a multi view video using up to four videos. The edited videos are saved in MP4 format. In the multi view, you can use various edit functions, for example:

inserting music or captions.

displaying the track information including the route and speed data.

Click [Tools] > [Create Multi View].

Drag and drop the video files* shown in thumbnails into the right area then click [Next] to open the [Edit] window.

* You can select up to four videos.

Edit the video contents in the [Edit] window. When editing is complete, click [Next].

A Layout
When multiple video contents are selected, click the [Change Layout] button to make the following arrangements.

Changing the location of video materials

Selecting applied sound materials and GPS information

Rotating or reversing the direction of video material

Track information (GPS)
You can select the display pattern of video materials which contains route and speed data.
Synchronize Videos
You can analyze multiple video contents which are simultaneously recorded and adjust the gap of start points for playing each video.
Music
You can select the music for the video content.
Volume
You can adjust the volume level of music or video content.
B Timeline
If markers are included in the video content, they are shown on the upper timeline. When editing the content with the modes [Trim], [Speed], [Repeat], and [Captions], you can adjust each setting with the bottom timeline.
C Trim
You can cut out the unneeded parts of video content.
Speed
You can set slow-motion or double speed areas in the video content as well as the playback speed.
Repeat
You can repeat or play back the same scenes in reverse.
Captions
Enter letters in the video content. Details such as letter location, colors, and font can be selected.
D Save Project
You can save material being edited as a project file. By using project files, you can continue editing a project in progress.

Enter the file name, select the destination folder and image quality, and click [Save] to save the edited video.

Page top

Create time-lapse movie

You can create time-lapse movies using photos captured with the continuous shooting or interval timer shooting modes. The created video is saved in MP4 format.

  • You need at least 15 photos to create a time-lapse movie. The maximum number of photos that can be used for creating time-lapse movies are unlimited.
  • Only JPEG file format can be supported.

Click [Tools] > [Create time-lapse movie].

Drag and drop multiple photos shown in thumbnails into the right area then click [Next] to open the edit window.

  • The photos are shown in grouped photos on the thumbnails when the photos match the below conditions:
  • photos which have group information
  • photos which are taken in regular intervals (no group information)

Edit the video content in the edit window. When editing is complete, click [Next].

A Time-lapse setting
You can adjust the playback speed of photos.
Music
You can select the music for the video content.
Volume
You can adjust the volume level of music or video content.
B Timeline
If markers are included in the video content, they are shown on the upper timeline. When editing the content with the modes [Trim] and/or [Captions], you can adjust each setting with the bottom timeline.
C Trim
You can cut out the unneeded parts of video content.
Captions
Enter letters in the video content. Details such as letter location, colors, and font can be selected.
D Save Project
You can save material being edited as a project file. By using project files, you can continue editing a project in progress.

Enter the file name, select the destination folder and image quality, and click [Save] to save the edited video.

Page top

Multiple Edit (speed/captions/sound)

You can use various edit functions such as inserting music or captions. The edited videos are saved in MP4 format. When you use multiple videos, the videos are saved as one combined video.

Click [Tools] > [Multiple Edit (speed/captions/sound)].

Drag and drop a video or multiple video files shown in thumbnails into the right area, then click [Next] to open the edit window.

Edit the video content in the [Edit] window. When editing is complete, click [Next].

A Content
You can rotate or reverse the direction of video material.
Music
You can select the music for the video content.
Volume
You can adjust the volume level of music or video content.
B Timeline
If markers are included in the video content, they are shown on the upper timeline. When editing the content with the modes [Trim], [Speed], [Repeat], and [Captions], you can adjust each setting with the bottom timeline.
C Trim
You can cut out the unneeded parts of video content.
Speed
You can set slow-motion or double speed areas in the video content as well as the playback speed.
Repeat
You can repeat or play back the same scenes in reverse.
Captions
Enter letters in the video content. Details such as letter location, colors, and font can be selected.
D Save Project
You can save material being edited as a project file. By using project files, you can continue editing a project in progress.

Enter the file name, select the destination folder and image quality, and click [Save] to save the edited video.

Page top
Page top